Fit two Dzus fasteners at the bottom of the front end, And one at The Top. Mount Dzus plates behind them to the car.

Front End Mounting Kit .Price=199.00 for the set

Made From lightweight Chromoly Tubing

Mounting Kit Includes:

A. 4" x 4" Plates, 6 total

B. 1" x 48" Center Tube Qty=1

C. 7/8" x 16" End Tube Qty=2

D. 1/2" x 16" Slip Tube Qty=4

F. 10 Dzus Fasteners

Tip: Tack weld the kit together inside of the front end,

then remove it to finish welding it outside of the front end.

Instructions:

A. 4" x 4" Plates get temporarily riveted to the sides of the fenders, the lower pan and the upper pan.

B. Fit Long tube "B" and end tubes "C" for length, then weld plates on the end tubes"C".

Next weld the end tubes"C" to the long tube"B"

C. Weld Slip tube "E" to the cars front frame rails.

D. Tack weld the kit together inside of the front end, At The End Of The Install, Use The "C"
Clip and Tack Weld it To The Center Tube, Right next To The Frame Rail Plates and This Creates A stop That Doesnt Allow The Front End To Slide Side To Side.

E. Fiberglass over "A" plates to hold it in the front end. Or rivet them in place.

F. Set up Dzus Plates and Buttons

Door Hinge Kits. Price=180.00 for the set

The most precise door hinge available! Our kit features 4 door mounting pads for customized mounting locations,as well as 4 Backing plates

Allow's a more accurate door alignment and easier door removal.

Just open the door and lift off!

Made From lightweight Chromoly Tubing

Aluminum Hood Springs . Price=35.00 a pair Weight=3 a pair. Ship: UPS Item.

DZUS Fasteners and Backing Plates. Price=45.00 For a Set of Ten. Weight=3. Ship: UPS Item.

Aero Pro Scoop Air plate. Price=60.00 Weight=2 Ship: UPS Item.

Small Dummy Headlights 5-1/2inch Bulb size. Price=38.00a pair Weight=2 a pair. Ship: UPS Item.

Large Dummy Headlights 8inch Bulb size. Price=38.00 a pair Weight=2 a pair. Ship: UPS Item.